Low Amp probe
Low Amp Probe
This cost-effective low current probe is ideal for capturing waveforms from fuel pumps, injectors, relays, ignition and more. This probe can be used with just about any meter capable of measuring DC voltage.
Capable of reading amperages from 10mA to 60A through two range setting of 1mv/100mA and 1mV/10mA (same as 10mV/1A and 100mV/1A).
[quote author=”Jorge Menchu,”]
For many diagnostic situations, if you are not seeing the current ramp, you are missing critical information.
[/quote]
[raw]
[tabs
tab1=”Features”
tab2=”Specifications”
tab3=”Purchase”
]
[slide1]
[check_list]
- Small nose (1″ x 1/2″) we have found.
- Zero push button (not wheel).
- Low battery indicator.
- Lead terminates to banana plugs.
[/check_list]
[/slide1]
[slide2]
[check_list]
- Size at end of jaw: 1″ wide x 1/2″ thick x 2-1/4″ long
- Conductor opening: 9mm
- Overall Length: 7-3/4″
- Calibration settings: 1mv/100mA and 1mV/10mA
- Accuracy: ranges from 1.5% to 2% under 20A and up to 8% over 20A.
- Range: 10mA-60A
- Frequency response: Up to 20KHz.
[/check_list]
[/slide2]
[slide3] [/slide3]
[/tabs]
[/raw]
Solenoid Current Ramp
